10~25Mpa Industrial Oxygen Generator For Hospital , Oxygen
VPSA oxygen generator
1. Produce Scale:5~1500Nm3/h
2. Purity: 21%~95%(v/v)
3. Pressure: 10~25Mpa
4. Energy for Consumption Oxygen:0.36~0.42KWh/Nm
Use air blower to supply compressed air into adsorption tower;
adsorption in low pressure and
adsorption in vacuum status.It means in the pressure (wind pressure
) which is slightly above
atmosphere pressure, using mixed bed composed of VPSA special
molecular sieve and dryer to
adsorb the N2, CO2,H2O and the impurities, making oxygen
accumulated and collected at the
end of bed .Saturation sorption of molecular sieve bed will be
desorbed in vacuum tatus ,so as to circularly generate high purity
Oxygen . (90~95%)
1. Only need to supply fan and power for VPSA Oxygen generating
system to produce oxygen.
2. Low energy consumption of equipment, low operation cost.
3. Easy to adjust the puriy of oxygen , the purity can be adjusted
from 21% to 95 %.
4. Highly automatic operation, fast gases generating , fully
automatic control system without anyone on duty. We can get the
oxygen within 10~3o minutes after we start up the equipment.
5. Small structure and occupation area, low reqirement for civil
6. Unique gas distribution technology and compaction; avoid the
influence of reciprocating air on molecular sieve, in favor of
extending their lifespan .
7. Fully automatic control system; Devices can be remotely
monitored, start-up and shut-down .
8. Suitable for middle and large capacity.
|Main Performance Index|
|Product Production Capacity||5~1500Nm3/h|
|Product Purity||21%~95% (v/v)|
|Energy for Consumption Oxygen||0.36~0.42KWh/Nm3|